POLARaudio Product Training Schedule
As part of our continued training programme, POLARaudio would like to invite you to attend our training courses specializing in the wide range of our distributed products.
 
We have microphone techniques courses all the way through to advanced programming courses, all of which are taught by our technical and product specialists.
 
These training days are on a first come first serve basis and places are limited so a quick response is advisable.
 
To book your place on a course please click the “sign me up” icon of your choice and enter all your details. Alternatively confirm by email- training@polaraudio.co.uk or Fax 01444 258444.  
 
We advise that to get the most from the courses attendees should bring a laptop, if you are unable to bring a laptop please state so we can make arrangements to loan one. If you require hotel accommodation in order to attend the course, either before or after, please again let us know so that arrangements can be made on your behalf.
 Please note the following about POLARaudio training courses:
* All courses are free of charge to POLARaudio account holders and trade customers.

* End users wanting to attend will be charged a fee of £150
(1 day course) & £250 (2 day course including B&B).

* Unless stated otherwise, all courses will be held at the POLARaudio head office in Burgess Hill.

* All attendees will be provided with refreshments & lunch on the day of each course.

* A cancellation charge of £100 will be issued if customers fail to advise POLARaudio they will not be attending courses 5 working days before they are due to take place. Failing to turn up on the day will incur a
£150 charge (this applies to both account & non account holders). Cancellations must be in writing.

*All attendees will be sent a POLARaudio certificate for completing & attending courses.
w

9 February
2012

 Nexia
Level 1		 Introduction to using Biamp's Nexia DSP architecture and software including, interfaces,
DSP blocks and logic functions.

09:30

16:30

 Liam Richards
16 February
2012
 Biamp
Level 2

Set-up and configuration training for Biamp
Nexia TC and VC units. Attendees are expected to have knowledge of basic Nexia programming.

09:30

16:30

Liam Richards
23 February
2012
 beyerdynamic
Conference System		 Introduction to wired and wireless conferencing system installation including software configuration, antenna distribution and system design.

09:30

16:30

Liam Richards
1 March
2012
 Cue
Level 1

Introduction to using Cue Hardware and the CVC Software, Updating firmware, creating a GUI and introduction to CVC Language.

09:30

16:30

Liam Richards

8 March
2012

Cue
Level 2

Detailed look at programming, how to create Graphics, capturing Infrared signals.

09:30

16:30

Liam Richards

15 March
2012

Nexia
Level 1		 Introduction to using Biamp's Nexia DSP architecture and software including, interfaces,
DSP blocks and logic functions.

09:30

16:30

 Liam Richards
22 March
2012
Biamp
Level 2		 Set-up and configuration training for Biamp
Nexia TC and VC units. Attendees are expected to have knowledge of basic Nexia programming.

09:30

16:30

 Liam Richards
29 March
2012
Biamp
Level 3 		Advanced Audio Networking (AVB and Cobranet).
Large system set up and configuration

09:30

16:30

 Liam Richards

5 April
2012

beyerdynamic
Conference System

Introduction to wired and wireless conferencing system installation including software configuration, antenna distribution and system design.

09:30

16:30

Liam Richards
12 April
2012
Cue
Level 1		 Introduction to using Cue Hardware and the CVC Software, Updating firmware, creating a GUI and introduction to CVC Language.

09:30

16:30

Liam Richards
19 April
2012
Microphone Techniques This course is designed to show how to correctly use microphones within conference, audiovisual and presentation environments. This includes technologies, placement and acoustic factors. 13:30 16:30 Liam Richards
26 April
2012
Nexia
Level 1		 Introduction to using Biamp's Nexia DSP architecture and software including, interfaces,
DSP blocks and logic functions.		 09:30 16:30 Liam Richards

3 May
2012

Biamp
Level 2		 Set-up and configuration training for Biamp
Nexia TC and VC units. Attendees are expected to have knowledge of basic Nexia programming.		 09:30 16:30 Liam Richards
10 May
2012 		beyerdynamic
Conference System		 Introduction to wired and wireless conferencing system installation including software configuration, antenna distribution and system design. 09:30 16:30 Liam Richards
17 May
2012 		Cue
Level 1		 Introduction to using Cue Hardware and the CVC Software, Updating firmware, creating a GUI and introduction to CVC Language. 09:30 16:30 Liam Richards
24 May
2012 		Cue
Level 2 		Detailed look at programming, how to create Graphics, capturing Infrared signals. 09:30 16:30 Liam Richards
31 May
2012 		Nexia
Level 1		 Introduction to using Biamp's Nexia DSP architecture and software including, interfaces,
DSP blocks and logic functions.		 09:30 16:30 Liam Richards
7 June
2012 		Biamp
Level 2		 Set-up and configuration training for Biamp
Nexia TC and VC units. Attendees are expected to have knowledge of basic Nexia programming.		 09:30 16:30 Liam Richards
14 June
2012 		beyerdynamic
Conference System		 Introduction to wired and wireless conferencing system installation including software configuration, antenna distribution and system design. 09:30 16:30 Liam Richards
21 June
2012 		Cue
Level 1		 Introduction to using Cue Hardware and the CVC Software, Updating firmware, creating a GUI and introduction to CVC Language. 09:30 16:30 Liam Richards
28 June
2012 		Cue
Level 2 		Detailed look at programming, how to create Graphics, capturing Infrared signals. 09:30 16:30 Liam Richards
5 July
2012 		Nexia
Level 1		 Introduction to using Biamp's Nexia DSP architecture and software including, interfaces,
DSP blocks and logic functions.		 09:30 16:30 Liam Richards
12 July
2012 		Biamp
Level 2		 Set-up and configuration training for Biamp
Nexia TC and VC units. Attendees are expected to have knowledge of basic Nexia programming.		 09:30 16:30 Liam Richards
19 July
2012 		Biamp
Level 3 		Advanced Audio Networking (AVB and Cobranet).
Large system set up and configuration		 09:30 16:30 Liam Richards
26 July
2012 		beyerdynamic
Conference System		 Introduction to wired and wireless conferencing system installation including software configuration, antenna distribution and system design. 09:30 16:30 Liam Richards
2 August
2012 		Cue
Level 1		 Introduction to using Cue Hardware and the CVC Software, Updating firmware, creating a GUI and introduction to CVC Language. 09:30 16:30 Liam Richards
9 August
2012 		Microphone Techniques This course is designed to show how to correctly use microphones within conference, audiovisual and presentation environments. This includes technologies, placement and acoustic factors. 13:30 16:30 Liam Richards
16 August
2012 		Nexia
Level 1		 Introduction to using Biamp's Nexia DSP architecture and software including, interfaces,
DSP blocks and logic functions.		 09:30 16:30 Liam Richards
23 August
2012 		Biamp
Level 2		 Set-up and configuration training for Biamp
Nexia TC and VC units. Attendees are expected to have knowledge of basic Nexia programming.		 09:30 16:30 Liam Richards
30 August
2012 		beyerdynamic
Conference System		 Introduction to wired and wireless conferencing system installation including software configuration, antenna distribution and system design. 09:30 16:30 Liam Richards
6 September
2012 		Cue
Level 1		 Introduction to using Cue Hardware and the CVC Software, Updating firmware, creating a GUI and introduction to CVC Language. 09:30 16:30 Liam Richards
13 September
2012 		Cue
Level 2 		Detailed look at programming, how to create Graphics, capturing Infrared signals. 09:30 16:30 Liam Richards
20 September
2012 		Nexia
Level 1		 Introduction to using Biamp's Nexia DSP architecture and software including, interfaces,
DSP blocks and logic functions.		 09:30 16:30 Liam Richards
27 September
2012 		Biamp
Level 2		 Set-up and configuration training for Biamp
Nexia TC and VC units. Attendees are expected to have knowledge of basic Nexia programming.		 09:30 16:30 Liam Richards
4 October
2012 		beyerdynamic
Conference System		 Introduction to wired and wireless conferencing system installation including software configuration, antenna distribution and system design. 09:30 16:30 Liam Richards
11 October
2012 		Cue
Level 1		 Introduction to using Cue Hardware and the CVC Software, Updating firmware, creating a GUI and introduction to CVC Language. 09:30 16:30 Liam Richards
18 October
2012 		Cue
Level 2 		Detailed look at programming, how to create Graphics, capturing Infrared signals. 09:30 16:30 Liam Richards
25 October
2012 		Nexia
Level 1		 Introduction to using Biamp's Nexia DSP architecture and software including, interfaces,
DSP blocks and logic functions.		 09:30 16:30 Liam Richards
1 November
2012 		Biamp
Level 2		 Set-up and configuration training for Biamp
Nexia TC and VC units. Attendees are expected to have knowledge of basic Nexia programming.		 09:30 16:30 Liam Richards
8 November
2012 		Biamp
Level 3 		Advanced Audio Networking (AVB and Cobranet).
Large system set up and configuration		 09:30 16:30 Liam Richards
15 November
2012 		beyerdynamic
Conference System		 Introduction to wired and wireless conferencing system installation including software configuration, antenna distribution and system design. 09:30 16:30 Liam Richards
22 November
2012 		Cue
Level 1		 Introduction to using Cue Hardware and the CVC Software, Updating firmware, creating a GUI and introduction to CVC Language. 09:30 16:30 Liam Richards
29 November
2012 		Microphone Techniques This course is designed to show how to correctly use microphones within conference, audiovisual and presentation environments. This includes technologies, placement and acoustic factors. 13:30 16:30 Liam Richards
6 December
2012 		Nexia
Level 1		 Introduction to using Biamp's Nexia DSP architecture and software including, interfaces,
DSP blocks and logic functions.		 09:30 16:30 Liam Richards
13 December
2012 		Biamp
Level 2		 Set-up and configuration training for Biamp
Nexia TC and VC units. Attendees are expected to have knowledge of basic Nexia programming.		 09:30 16:30 Liam Richards
20 December
2012		 beyerdynamic
Conference System		 Introduction to wired and wireless conferencing system installation including software configuration, antenna distribution and system design. 09:30 16:30 Liam Richards

back