POLARaudio- MC2 Audio- Pro Audio Amplifiers (+44) 01444 258 258

T500 Designed for use in a variety of applications in the fixed installation market, where sonic quality and reliability are the highest priorities, the high performance T500 (250W/channel into 4 ohms) has been designed with complementary AB bipolar outputs, using the unique MC2 current driven floating drive stage and conventional analogue level controls. The sound quality is maintained over a very wide range of load and temperature conditions. Sophisticated 'side chain' limiters prevent distortion and speaker damage but are out-of-circuit until the onset of clipping. The control circuitry provides full protection against short circuits, DC and excessive temperature together with inrush current limiting and delayed 'turn on'. All MC2 Audio products are covered by a 5 year Warranty Features • Digital power supply with large power reservoir giving extremely high peak power without any bass 'sag'. • MC2 proprietary current driven output stages for ultra high-definition sound. • Full high frequency power - the E45 will deliver its power over the entire audio bandwidth. • Lightweight aluminium construction. • All new, low distortion limiters with adjustable threshold points for extra speaker protection. • Sophisticated power control system linked to both the limiter and the power supply, keeping the amplifier within its operating limits at all times. • Power Reduction Circuit (PRC) controls on rear panel, linked to the limiter threshold which allow each channel to be independently set so that different loudspeakers can be connected to each channel with safety. • Optional cross-over cards available. 24dB/Octave Linkwitz Riley. • Soft start 'power on' with full in-rush protection. • Full DC, short circuit and thermal protection, which automatically reconnects when the fault is cleared. Front panel LEDs indicate fault condition.	T500 Data Sheet

T1000 Designed for use in a variety of applications in the fixed installation market, where sonic quality and reliability are the highest priorities, the high performance T1000 (500W/channel into 4 ohms) has been designed with complementary AB bipolar outputs, using the unique MC2 current driven floating drive stage and conventional analogue level controls. The sound quality is maintained over a very wide range of load and temperature conditions. Sophisticated 'side chain' limiters prevent distortion and speaker damage but are out-of-circuit until the onset of clipping. The control circuitry provides full protection against short circuits, DC and excessive temperature together with inrush current limiting and delayed 'turn on'. All MC2 Audio products are covered by a 5 year Warranty Features • Four channels delivering 850W peaks into 8 ohms and 900W peaks into 4 ohms. (Pink noise or music, four channels driven). • Digital power supply with large power reservoir giving extremely high peak power • Automatic impedance sensing, changes the power for either a 4 or 8 ohm load • Digital power supply with large power reservoir giving extremely high peak power without any bass 'sag'.MC2 proprietary current driven output stages for ultra high-definition sound • Full high frequency power - the E-Series amplifiers will deliver their power over the entire audio bandwidth • Lightweight aluminium construction • Low distortion limiters for speaker protection • Sophisticated power control system linked to both the limiter and the power supply, keeping the amplifier within its operating limits at all times • Optional cross-over cards available. 24dB/Octave Linkwitz Riley Soft start "power-on" with full in-rush protection. Full DC, short circuit and thermal protection • Front panel display incorporates five-segment LED metering for each output, load indicator signalling either an 8 or 4 ohm load and Auto protect indicator • Weighs around 10.25kg	T1000 Data Sheet

T1500 Designed for use in a variety of applications in the fixed installation market, where sonic quality and reliability are the highest priorities, the high performance T1500 (750W/channel into 4 ohms) has been designed with complementary AB bipolar outputs, using the unique MC2 current driven floating drive stage and conventional analogue level controls. The sound quality is maintained over a very wide range of load and temperature conditions. Sophisticated 'side chain' limiters prevent distortion and speaker damage but are out-of-circuit until the onset of clipping. The control circuitry provides full protection against short circuits, DC and excessive temperature together with inrush current limiting and delayed 'turn on'. All MC2 Audio products are covered by a 5 year Warranty Features • Four channels delivering 850W peaks into 8 ohms and 900W peaks into 4 ohms. (Pink noise or music, four channels driven). • Digital power supply with large power reservoir giving extremely high peak power • Automatic impedance sensing, changes the power for either a 4 or 8 ohm load • Digital power supply with large power reservoir giving extremely high peak power without any bass 'sag'.MC2 proprietary current driven output stages for ultra high-definition sound • Full high frequency power - the E-Series amplifiers will deliver their power over the entire audio bandwidth • Lightweight aluminium construction • Low distortion limiters for speaker protection • Sophisticated power control system linked to both the limiter and the power supply, keeping the amplifier within its operating limits at all times • Optional cross-over cards available. 24dB/Octave Linkwitz Riley Soft start "power-on" with full in-rush protection. Full DC, short circuit and thermal protection • Front panel display incorporates five-segment LED metering for each output, load indicator signalling either an 8 or 4 ohm load and Auto protect indicator • Weighs around 10.25kg	T1500 Data Sheet

T2000 Designed for use in a variety of applications in the fixed installation market, where sonic quality and reliability are the highest priorities, the high performance T1500 (750W/channel into 4 ohms) has been designed with complementary AB bipolar outputs, using the unique MC2 current driven floating drive stage and conventional analogue level controls. The sound quality is maintained over a very wide range of load and temperature conditions. Sophisticated 'side chain' limiters prevent distortion and speaker damage but are out-of-circuit until the onset of clipping. The control circuitry provides full protection against short circuits, DC and excessive temperature together with inrush current limiting and delayed 'turn on'. All MC2 Audio products are covered by a 5 year Warranty Features • Four channels delivering 850W peaks into 8 ohms and 900W peaks into 4 ohms. (Pink noise or music, four channels driven). • Digital power supply with large power reservoir giving extremely high peak power • Automatic impedance sensing, changes the power for either a 4 or 8 ohm load • Digital power supply with large power reservoir giving extremely high peak power without any bass 'sag'.MC2 proprietary current driven output stages for ultra high-definition sound • Full high frequency power - the E-Series amplifiers will deliver their power over the entire audio bandwidth • Lightweight aluminium construction • Low distortion limiters for speaker protection • Sophisticated power control system linked to both the limiter and the power supply, keeping the amplifier within its operating limits at all times • Optional cross-over cards available. 24dB/Octave Linkwitz Riley Soft start "power-on" with full in-rush protection. Full DC, short circuit and thermal protection • Front panel display incorporates five-segment LED metering for each output, load indicator signalling either an 8 or 4 ohm load and Auto protect indicator • Weighs around 10.25kg	T2000 Data Sheet

T3500 Designed for use in a variety of applications in the fixed installation market where sonic quality is the highest priority, the T3500 at 1850W per channel will bring the well renowned MC2 sound quality and reliability to a wider range of users. Building on the MC2 commitment to sound quality and reliability, this exciting new amplifier has been designed with complementary AB bipolar outputs, using the unique MC2 current driven floating drive stage and conventional analogue level controls. The sound quality is maintained over a very wide range of load and temperature conditions. New, low distortion optical limiters with automatic response times, ensure speaker protection whilst maintaining transparent sonic performance. The control circuitry provides full protection against short circuits, DC and excessive temperature together with inrush current limiting and delayed ‘turn on’.. All MC2 Audio products are covered by a 5 year Warranty Features • Complementary class A/B bipolar outputs, using the unique MC2 current driven floating drive stage, which gives one of the 'cleanest' sounds available. • Sophisticated monitoring of amplifier temperature and load conditions. • Proprietary control and protection circuitry continuously checks for all fault conditions such as shorted outputs, DC on outputs, excessive temperature (blocked air flow), component failure etc... and disconnects the outputs, if such an event occurs. • Low noise vari-speed fans. • 'Low distortion optical limiters prevent speaker damage from clipped signals whilst maintaining transparent sonic performance. • Audio "fade-up" on Power-on. • Optional internal crossover cards available. • New proprietary "Ultra Cool" heatsink. • Full mains inrush protection.	T3500 Data Sheet