Cobra Loudspeaker System | AM12/ M12 Wedges | Power H Series | CMS Series | XA System Amps | LX Series
Paramus Contractor Line PCL Series Power Amplifiers– PCL 1245 | PCL 1415 | PCL 1125T | PCL 1225T | PCL 1240T
The DYNACORD PCL-Series power amp line combines outstanding audio performance, exceptional reliability and secure operational safety in a compact 2RU chassis design.

All models in the PCL-Series provide several protection circuits which not only prevent the power amplifier itself but also the connected loudspeaker systems from being damaged. These protections include Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection and Thermal Overload Protection.

All PCL-Series power amps feature different hi-pass filters with switch selectable cut-off frequency to attenuate unwanted low-frequency signals. Infinitely variable low-noise high performance fans guarantee absolute thermal stability while keeping fan noise to a minimum. Direct “flow-thru” chassis design allows for a smooth flow of air from front-to-rear, which allows trouble-free operation even in smaller amp-racks.

Compact high density power supply units with low-leakage toroidal transformers provide extensive headroom far above the listed power rating. Premium phoenix style screw-lock connectors prevent accidental disconnection resulting in a more secure connection of audio signal and speaker cables.

All PCL-Series “T” version models are equipped with high performance output transformers also provide floating outputs for 50V, 70V and 100V installations. These models also provide voltage limiters to protect the loudspeaker outputs against overvoltage.

All Dynacord products are covered by a 3 year Warranty
PCL 1245
Load Impedance 8 ohms 4 ohms
Max. Midband Output Power: THD=0.1%, 1 Hz 300 W 480 W
Rated Output Power THD <0.1%, 20 Hz...20 kHz 225 W 450 W
Max. Single Channel Output Power- Dynamic Headroom 280 W 560 W
Max. Bridged Output Power THD=0.1%, 1 Hz 900 W -
Max. RMS Voltage Swing THD=0.1% 44.7 V
Protection: Audio limiters, high temperature, peak current limiters, turn-on delay
Dimensions 483 x 88 x 405
Weight 16.5 kg

Features
• Maximum Bridge Power @ 8ohm 900W
• Frequency Response 10Hz-40kHz
• Signal To Noise (A Weighted) 104dB
• Phoenix style input connectors for easy installation
• Phoenix style connector block for all output modes
• Independent rear level controls for each channel
• Front-to-rear cooling
PCL 1245 Manual & Data Sheet
Data Sheet Brochure
PCL 1415
Load Impedance 8 ohms 4 ohms
Max. Midband Output Power: THD=0.1%, 1 Hz 100 W 160 W
Rated Output Power THD <0.1%, 20 Hz...20 kHz 75 W 150 W
Max. Single Channel Output Power- Dynamic Headroom 120 W 200 W
Max. Bridged Output Power THD=0.1%, 1 Hz 315 W -
Max. RMS Voltage Swing THD=0.1% 432.1 V
Features
• Maximum Bridge Power @ 8ohm 315W
• Frequency Response 10Hz-40kHz
• Phoenix style input connectors for easy installation
• Phoenix style connector block for all output modes
• Bridge mode operation
• Independent rear level controls for each channel
• Signal To Noise (A Weighted) 101dB
• Front-to-rear cooling		 Dimensions 483 x 88 x 405
Weight 18 kg
PCL 1415 Manual & Data Sheet
Data Sheet Brochure
PCL 1125T
Load Impedance 100 V 70 V 50 V
Max. Midband Output Power: THD=0.1%, 1 Hz 270 W 270 W 270 W
Rated Output Power THD <0.1%, 20 Hz...20 kHz 250W / 40 ohm 250W / 19.6 ohm 250W / 10 ohm
Max. Single Channel Output Power- Dynamic Headroom 300 W 290 W 290 W
Max. RMS Voltage Swing THD=0.1% 117 V 82 V 59 V
Protection: Audio limiters, high temperarture, peak current limiters, turn-on delay

Features
• Phoenix style input connectors for easy installation
• Phoenix style connector block for all output modes
• Frequency Response 65Hz-40kHz
• Signal To Noise (A Weighted) 103dB
• Independent rear level controls
• Front-to-rear cooling
• Voltage limiters

 Dimensions 483 x 88 x 405
Weight 16.5 kg
PCL 1125T Manual & Data Sheet
Data Sheet Brochure
PCL 1225T
Load Impedance 8 ohm 4 ohm 100 V 70 V 50 V
Max. Midband Output Power: THD=0.1%, 1 Hz 125 W 270 W 270 W 270 W 270 W
Rated Output Power THD <0.1%,
20 Hz...20 kHz		 125 W 250 W 250W / 40 ohm 250W / 19.6 ohm 250W / 10 ohm
Max. Single Channel Output Power- Dynamic Headroom 160 W 320 W 300 W 290 W 290 W
Max. RMS Voltage Swing THD=0.1% 35.4 V 35.4 V 117 V 82 V 59 V

Features
• 2 x Channels supporting;
• 270 Watts @ 4 ohms or
• 135W @ 8ohm or
• 270W @ 100v Line through built-in transformer
• Phoenix style input connectors for easy installation
• Phoenix style connector block for all output modes
• Frequency Response 65Hz-40kHz
• Maximum Bridge Power @ 8ohm 540W
• Signal To Noise (A Weighted) 103dB
• Independent rear level controls for each channel
• Front-to-rear cooling

 Dimensions 483 x 88 x 405
Weight 23.5 kg
PCL 1225T Manual & Data Sheet
PCL 1240T
Load Impedance 8 ohm 4 ohm 100 V 70 V 50 V
Max. Midband Output Power: THD=0.1%, 1 Hz 215 W 430 W 430 W 430 W 430 W
Rated Output Power THD <0.1%,
20 Hz...20 kHz		 200 W 400 W 400W / 25 ohm 400W /12.5 ohm 400W /6.25 ohm
Max. Single Channel Output Power- Dynamic Headroom 260 W 520 W 520 W 500 W 480 W
Max. RMS Voltage Swing THD=0.1% 44.7 V 44.7 V 117 V 82 V 59 V

Features
• 2 x Channels supporting;
• 430 Watts @ 4 ohms or
• 215W @ 8ohm or
• 430W @ 100v Line through built-in transformer
• Phoenix style input connectors for easy installation
• Phoenix style connector block for all output modes
• Frequency Response 65Hz-40kHz
• Maximum Bridge Power @ 8ohm 860W
• Signal To Noise (A Weighted) 103dB
• Independent rear level controls for each channel
• Front-to-rear cooling

 Dimensions 483 x 88 x 405
Weight 26 kg
PCL 1240T Manual & Data Sheet
Data Sheet Brochure