Features
• Modular based design
• Amplification modules have software configurable power levels/load options
- Maximum of 2400 Watts of power in 3 rack spaces
• TCP/IP Network controllable
• LED Indication:
- Signal present
- Peak present
- Clip present
- Heat sink temperature fault
- Amplifier failure
- Fan stuck-rotor
• Internal amplifier module failover mode
• Entire device failover mode
 |
||||
| AudiaFLEX | AudiaFUSION | AudiaSOLO | AudiaEXPI & AudiaEXPO | Control Options |
||||
| AudiaFUSION - Networked Amplified Processor Digital Audio PlatformAudiaFUSION is a product so innovative we had to create a completely new category to describe it: Networked Amplified Processor. A full-featured DSP with enough power to drive a system of its own, AudiaFUSION is a leap forward in audio technology. It allows you to configure systems that are decentralized, placing components close to speakers for reduced labor and material costs. And when you install AudiaFUSION in a system together with AudiaFLEX, processing resources are shared, making the entire system more efficient. The potential to save money and maximize profit is, well, revolutionary. CobraNet® enabled DSP processor frame supporting up to 8 amp modules in a single frame, a full-featured DSP that handles far more than speaker processing. Frame cost only.
|
 |
|||
|
|
||||
 AM 600The AM-600 card offers software configurable power levels/load options with 8 amplification modules per frame with 100 to 600 Watts per module (maximum of 2400 Watts per chassis) and 70V or 100V with direct drive capability, or low-impedance (4 or 8 ohm) operation. |
||||
|
|
||||
| Networked Paging Station - 1 is a microphone console using a single cable to carry audio, control, and power, with an innovative user-interface, designed exclusively for use with AudiaFLEX systems. It provides a powerful and easy-to-use set of tools with a wide range of features and functions for the paging market. Networked Paging Station - 1 is ideal for stadiums, convention centers, shopping malls, and other facilities where affordable and reliable delivery of clear audio is paramount. Networked Paging Station - 1 integrates with AudiaFLEX networks via CobraNet®. Utilizing the Networked Paging Station - 1 LCD display, scroll-wheel, and three buttons, users can quickly switch between pre-programmed groups and zones to address even the most complex page routing network. |
||||
| Features • designed for exclusive use with AudiaFLEX systems • Power Over Ethernet (PoE) or external supply • CobraNet audio/control plus power on single cable • rotary encoder with LCD for programming/setup • multiple station / multiple AudiaFLEX systems • 16 simultaneous pages allowed per AudiaFLEX unit • 32 programmable microphone button operations • 16 priorities, with override and lock-out functions • selectable announcement chime tone options • CE marked and RoHS compliance Specs Frequency Response: ±2 dB @ 150 Hz ~ 20 kHz Gain: 6 dB ~ 36 dB, selectable in 10 dB steps Maximum Input: 115 dB SPL Mic Type: electret condenser Mic Pattern: cardioid A/D Converters: 24-bit, 48 kHz Power: 802.3af (PoE) Class 1, 12~24VDC 3W Base Dimensions (HxWxD): 3.25” x 4.5” x 7” (83 x 114 x 178 mm) Mic Gooseneck Length: 14.5” (368 mm) Weight: 0.9 lbs. (0.41 kg) Compliance: EU Directive 2002/ 95 /EC, RoHS directive CE marked |
 |
|||
|
||||
Audia Firmware Upgrade Procedure