Features
• Up to 24 inputs/outputs, any combination by pairs, with or without CobraNet®
• Acoustic Echo Cancellation (AEC) available as separate input module(s)
• Control via:
-PC/laptop
-Remote control panels for level, presets, etc.
-Third-party control via RS-232
• Built-in diagnostic tools
• Remote function control via Ethernet
 |
||||||||
| AudiaFLEX | AudiaFUSION | AudiaSOLO | AudiaEXPI & AudiaEXPO | Control Options |
||||||||
| AudiaFLEX - Digital Audio Platform The next generation in Audia's Digital Audio Platform, AudiaFLEX gives you unprecedented control of your system with the ultimate flexibility in design. Choose any configuration of input (IP2) and output (OP2e) pairs to create the system you need without compromises. Multi-Channel audio can be seamlessly distributed among multiple units via CobraNet™, using economical Cat-5 cable. Control the processing power of the entire network over Ethernet, or via CUE, Crestron®, AMX®, or other popular controllers. Each AudiaFLEX can provide up to 24 channels of I/O, or expand your options even further with new AudiaEXPI and AudiaEXPO. AudiaFLEX is continuously being enhanced through hardware, firmware and software upgrades such as CobraNet® Latency (as low as 1.33 mS), Feedback Suppression, expanded Transfer function and other improvements. The new AEC-2HD card with our proprietary TrueSound™ Algorithm offers the most advanced acoustic echo cancellation in the world. The new PA-2 card gives you the power of an amp - in a card.
|
 |
|||||||
|
||||||||
|
|
||||||||
 IP2 Dual-Channel Mic/Line Input CardsIP2 input cards allow each AudiaFLEX installation to have the quantity and type of inputs required. Each IP2 Card provides two channels of mic/line input, as part of AudiaFLEX hardware. Inputs are balanced, and are provided on plug-in barrier strip connectors. Software control of individual inputs includes: gain w/ peak indication; +48V phantom power; mute; level; and signal invert. |
 OP2e Dual-Channel Mic/Line Output CardsOP2e output cards allow each AudiaFLEX installation to have the quantity and type of outputs required. Each OP2e Card provides two channels of mic/line output, as part of AudiaFLEX hardware. Outputs are balanced, and are provided on plug-in barrier strip connectors. Software control of individual outputs includes: mute; level; signal invert; and full-scale output reference. |
|||||||
|
|
||||||||
 AEC-2HD Dual-Channel Wide-Band Acoustic Echo Cancellation Input CardsAudia has always been ideal for audio and video conferencing. Now, AEC-2HD Input Cards allow each AudiaFLEX installation to have precisely the acoustic echo cancellation needed. With the ability to select AEC on individual input channels, your network conferencing can enjoy the power and flexibility of Audia. Each AEC-2HD Input Card provides two channels of acoustic echo cancellation and background noise reduction, as part of AudiaFLEX hardware. AEC-2HD Input Cards are designed and built using Biamp's proprietary TrueSound™ AEC algorithm for increased frequency response, improved audio quality, and more natural sound during full-duplex transmission of speech. Additional benefits include greater tolerance for differing signal levels, enhanced intelligibility and fast, easy setup. |
 TI-2 Dual-Channel Telephone Interface CardsTI-2 dual-channel Telephone Interface Cards allow AudiaFLEX to connect directly to standard analog lines. Being more than just a normal 'hybrid', each channel of the TI-2 includes line-echo cancellation, noise suppression, caller ID decoding, ring detection/validation, DTMF tone dialing, DTMF decoding, and call progress tone decoding. Used in conjunction with AEC-2HD Acoustic Echo Cancellation Cards, the TI-2 makes AudiaFLEX the most powerful, flexible, and affordable telephone conferencing product available. The TI-2 also allows AudiaFLEX to respond to DTMF control commands such as preset recalls from any telephone system. The TI-2 can be used for audio input-only applications such as paging access; or for audio output-only applications such as broadcast feeds and remote system monitoring. Up to twelve TI-2 Telephone Interface Cards can be installed into a single AudiaFLEX unit. |
|||||||
|
|
||||||||
 VoIP-2 Dual-Channel Voice Over Internet Protocol CardsVoIP-2 Cards for AudiaFLEX enable conferencing over VoIP directly from AudiaFLEX, with two channels of VoIP interface per card. VoIP-2 cards allow AudiaFLEX to connect directly to IP-based phone systems and eliminate the need for VoIP adapters. Used in conjunction with AEC-2HD Dual-Channel Wideband Acoustic Echo Cancellation Input Cards and TI-2 Dual-Channel Telephone Interface Cards, the VoIP-2 Card makes AudiaFLEX the most powerful, flexible, and affordable telephone conferencing product available. Combined with the TI-2 Card and/or CODEC, the VoIP-2 Card makes it possible to create redundancies within a conferencing system for multi-point conferences and/or back-up to VoIP lines. Up to twelve VoIP-2 Cards can be installed into a single AudiaFLEX unit. |
 PA-2 Dual-Channel Power Amplifier CardsPA-2 amplifier cards allow AudiaFLEX to directly power 4, 6, or 8 ohm speakers. The output power is software configurable from 5 to 30 watts dual-channel and from 10 to 60 watts mono-bridged. An upgraded AudiaFLEX power supply provides a total of 120 watts of power, for up to twelve PA-2 cards. |
|||||||
|
|
||||||||
 AM 600The AM-600 card offers software configurable power levels/load options with 8 amplification modules per frame with 100 to 600 Watts per module (maximum of 2400 Watts per chassis) and 70V or 100V with direct drive capability, or low-impedance (4 or 8 ohm) operation. |
||||||||
|
|
||||||||
|
|
||||||||
| Networked Paging Station - 1 is a microphone console using a single cable to carry audio, control, and power, with an innovative user-interface, designed exclusively for use with AudiaFLEX systems. It provides a powerful and easy-to-use set of tools with a wide range of features and functions for the paging market. Networked Paging Station - 1 is ideal for stadiums, convention centers, shopping malls, and other facilities where affordable and reliable delivery of clear audio is paramount. Networked Paging Station - 1 integrates with AudiaFLEX networks via CobraNet®. Utilizing the Networked Paging Station - 1 LCD display, scroll-wheel, and three buttons, users can quickly switch between pre-programmed groups and zones to address even the most complex page routing network. |
||||||||
Features • designed for exclusive use with AudiaFLEX systems • Power Over Ethernet (PoE) or external supply • CobraNet audio/control plus power on single cable • rotary encoder with LCD for programming/setup • multiple station / multiple AudiaFLEX systems • 16 simultaneous pages allowed per AudiaFLEX unit • 32 programmable microphone button operations • 16 priorities, with override and lock-out functions • selectable announcement chime tone options • CE marked and RoHS compliance Specs Frequency Response: ±2 dB @ 150 Hz ~ 20 kHz Gain: 6 dB ~ 36 dB, selectable in 10 dB steps Maximum Input: 115 dB SPL Mic Type: electret condenser Mic Pattern: cardioid A/D Converters: 24-bit, 48 kHz Power: 802.3af (PoE) Class 1, 12~24VDC 3W Base Dimensions (HxWxD): 3.25” x 4.5” x 7” (83 x 114 x 178 mm) Mic Gooseneck Length: 14.5” (368 mm) Weight: 0.9 lbs. (0.41 kg) Compliance: EU Directive 2002/ 95 /EC, RoHS directive CE marked |
 |
|||||||
|
||||||||
Audia Firmware Upgrade Procedure