CK 930
Designed for ENG/EFP applications, this mic has been specifically configured for use by news-gathering personnel and built to withstand the immediacy of news gathering. The extra-long handle gets the microphone out front during the frenzy of capturing the ultimate sound bite.
Features • Condenser microphone
• Internal shock mount for very low handling noise
• Rugged construction with Nextel® non-glare finish
• Weight-balanced, slim-profile design
• Set version includes: CK930 capsule, CV900 pre-amplifier, MVK930 cable
MC 836/ MC 837
Designed for use mounted on a boom pole, these shotgun microphones are ideal for capturing dialogue and audio from a distance; typically out of shot of a camera and within noisy environments. The outstanding directivity and smooth articulation make these microphones an ideal choice for studio and outside broadcast applications. The MC 836 and MC 837 have identical specifications but the MC 837 has a much longer interference tube and a very tight lobe response.
Features
• Condenser microphone, lobe/cardioid polar pattern
• Very wide frequency response
• Low frequency roll-off switch
• Rugged metal construction
Specification
Condenser
Operating principle pressure gradient line transducer technique
Lobe/cardioid lobe
Frequency response 40 - 20,000 Hz
Supply voltage 11-52 V phantom supply
Current consumption 4.3 mA
Open circuit voltage 30 mV/Pa
Nominal impedance 1180 ohm
Load impedance 1000 ohm
Max. SPL > 130 dB S
Equivalent nominal SPL; approx. 13 dB
Connection; 3-pin XLR mod. 2 = +, 3 = -, 1 = ground
Dimensions: diameter 21 mm
length 248mm (MC836) & 516 mm (MC837)
Weight 116g (MC836) & 218g (MC837)
M 58
Designed for ENG/EFP applications, this mic has been specifically configured for use by news-gathering personnel and built to withstand the immediacy of news gathering. The extra-long handle gets the microphone out front during the frenzy of capturing the ultimate sound bite.
Features
• Dynamic microphone
• Internal shock mount for very low handling noise
• Rugged construction with Nextel® non-glare finish
• Weight-balanced, slim-profile design
Specification
Frequency response 40 - 20,000 Hz
Omnidirectional
Open circuit voltage 1.3 mV/Pa
Nominal impedance 200 ohm
Load impedance > 200 ohm
MCE 58
A battery operated microphone for use with semi-professional ENG recording equipment such as DAT and MD machines that do not have provision for supplying phantom power or accepting balanced inputs.
Features
• Condenser microphone
• Internal shock mount for very low handling noise
• Rugged construction with Nextel® non-glare finish
• Battery operation
Specification
Frequency response 40 - 20,000 Hz
Omnidirectional
Open circuit voltage 4 mV/Pa
Nominal impedance 370 ohm (unbalanced)
Load impedance 2 kohm
Max. SPL at 1 kHz 132 dB
Power supply 12- 48 V
M 59
Specifically configured for ENG applications and reporters that require a solid fully-featured microphone for interview situations and sound-bite capture that can function under the most hostile of conditions.
Features
• Dynamic microphone
• Hypercardioid response
• Non-glare Nextel® finish
• Integral multi-stage windshield
• Sophisticated shock mount system
Specification
Frequency response 50 - 16,000 Hz
Hypercardioid
Rear attenuation at 1 kHz > 25 dB at 120°
Open circuit voltage 3.0 mV/Pa
Magnetic field suspension > 20 dB = 50 Hz
Nominal impedance 200 ohm
Load impedance > 1000 ohm
Diaphragm Macrolon®
MCE 494
A cardioid condenser microphone intended for direct connection to notebooks, portable DAT and MD recorders.
Its cardioid polar pattern and high gain before feedback make it ideal for location recordings.
Features
• Cardioid condenser capsule
• High gain before feedback
• Direct powering
• Excellent noise rejection
• Small size and very light weight 6.5 g
Specification
Condenser (back electret)
Operating principle Pressure gradient
Cardioid
Frequency response 30 - 18,000 Hz
Open circuit voltage approx. 20 mV/Pa
Nominal impedance approx. 2 kohm
Load impedance > 10 kohm
Max. SPL 120 dB
Signal-to-noise ratio 60 dB
Connection mini stereo jack (3.5 mm)
(L and R bridged)
Dimensions Length: 45 mm /
Diameter: 13.5 mm
MCE 86II.1 | MCE 86II.2 | MCE 86SII.1 | MCE 86SII.2 | MCE 86SII CAM
A highly directional professional shotgun microphone system for mounting on cameras or on a boom using optional mounts and suspension systems. They can also be table or desk mounted for broadcast interviewing when the microphone needs to be placed at a distance out of camera shot.
Features
• Condenser microphone, hypercardioid/lobe response
• Non-glare Nextel® finish
• Rugged and lightweight
• Operates from phantom power sources
(8-48VDC)
• MCE 86II.1 phantom only inc. EA86 hotshoe mount
• MCE 86II.2 incl. elastic suspension EA 19/25 and clamp MKV 11
• MCE 86SII.1 w/internal battery + phantom power inc. EA86 hotshoe mount
• MCE 86SII.2 w/ internal battery + phantom power inc. elastic suspension EA19/25 & clamp
• MCE 86SII CAM.2:phantom or battery power (1.5V), incl. elastic suspension EA 86 for camera mount, windscreen WS 716 and cable MVK 86-K3 (0.35m, XLR - 3.5mm stereo mini-jack)
Specification
Type MCE 86.1/ .2 MCE86S.1/S.2
Frequency response 5 - 18, kHz
Open circuit voltage 4.2 mV/Pa
Nominal impedance 190 ohm
Load impedance 1000 ohm
Max. SPL at 1 kHz 138 dB
Signal-to-noise ratio: 61 dB
A-weighted equivalent SPL 25 dB
Noise voltage 3.8 µV
Male connector 3-pin XLR
Weight (w/out cable) 92 g 120 g
Length 253 mm 310 mm
MCE 72
A compact stereo microphone for X-Y stereo recording in ENG/EFP applications with broadcast or semi-professional equipment. Integral windshields and shock mount systems make the microphone particularly suitable for on-location recording.
Features
• Condenser stereo microphone for X-Y recording
• Capsule orientation: 90° (+/- 45° off the microphone axis)
• Elastic transducer suspension system
• Battery powered
Versions MCE 72 CAM: with suspension, windscreen and cable
MCE 72 PV CAM: w/ camera mount, windscreen and cable
Specification
Frequency response 60 - 20,000 Hz
Cardioid
Open circuit voltage 10 mV/Pa
Nominal impedance 180 ohm
Load impedance > 1kohm
Max. SPL at 1 kHz 125 dB
Power supply 1.5V battery
MCE 82
A microphone for X-Y stereo recording in ENG/EFP applications with broadcast or semi-professional equipment. Integral windshields and shock mount systems make the microphone particularly suitable for on-location recording.
Features
• Condenser stereo microphone for X-Y-recording
• Capsule orientation: 90° (+/- 45° off the microphone axis)
• Elastic transducer suspension system
• Battery or phantom powered
Specification
Frequency response 50 - 20,000 Hz
Cardioid
Open circuit voltage 7.9 mV/Pa (= - 42 dBV)
Nominal impedance 200 ohm
Load impedance > 1000 ohm
Max. SPL at 1 kHz 128 dB
Power supply 12- 48 V
