MAV 800

illustrated with EA19/25
 MAV 802
 MKV 8/9/11
Virtually indestructible microphone clamps for vocal or instrument mics.
• MKV 8: for shaft ø 22/23
• MKV 9: for shaft ø 19-21
.• MKV11: for shaft ø 32-42.

*** all measurements in mm.
MKV 6
'Clothes peg' style clip for shaft ø19-32 mm.
 MKV 87
Drum clamp which mounts to the rim of the drum. Fitted with a 3/8" thread to allow mounting of any standard mic clip.
 EA 19/25 + MKV 11
Shockmounted mic clamp for overheads or where mechanical isolation is required. Accepts mics with shaft ø 19-25 mm.
EA 86
Betacam hotshoe mount for use w/ mic shaft ø
19-25 mm.
 EA 90
Elastic suspension
for MCE 90 & M 99.
 EA 37
Elastic suspension for MC 834/740/742 & MCD 100.
Inside ø 35 mm.
ZSH 20
Flush mounting shockmount for all
SHM 20, 22, 23 and SHM gooseneck
microphones. 35mm wide, 95mm long.
 ZSH 30.01
Flange mounting plate with 3/8" hole.
 ZSH 40
Gooseneck anti-vibration mount with 78mm diameter.

ZSH 40 (CM)
As above but with built-in XLR plug. Supplied with 1m long bare-ended cable.
ZSH 50
Heavy duty anti-vibration, rubber based table shockmount for use with gooseneck mics. Comes with 6 m long bare-ended cable.
 ZSH 51
Threaded 3/8” adapter for use with all gooseneck mics to floor or table stands. 1m long bare-ended cable.
 Microphone Bars
Microphone stereo mounting bars.
• ST 23550 adjustable for 2 mics
NR.215 for 5/8" outer and 3/8" / 1/2" inner diameter. Order #245.623


 NR.216 for 3/8" outer and 5/8" inner diameter. Order #111.465
 NR.217 for 5/8" outer and 3/8" inner diameter. Order #111.473