link to manufacturer
Australian Monitor

Power Amplifiers- 100 volt line | Power Amplifiers- Low impedance

AMD2100P
The Australian monitor AMD2100P is a 1 RU dual channel power amplifier of Class D design. The AMD2100P delivers 100 watts per channel into 100 volt, 70 volt or 4 ohms. The AMD2100P features front panel signal presence and fault indication per channel, rear panel volume controls, remote master VCA per channel, standby contact closure and RS232 port for control via a third party control system. Parameters that can be controlled via RS232 are Channel input cross mix level, channel input cross mix mute, channel output level and mute, Low power state and amplifier fault indication. The AMD2100P amplifier is as feature packed as it is innovative.

Features
• 1 RU, D class design
• 100 watts per channel @ 100 volt, 70 volt, & 4 ohm
• Signal present & fault indication per channel
• VCA master control per channel
• Low power contact closure
• RS232 control

Data Sheet

AMC + 120P & 250P
The AMC+ series of single channel power amplifiers gives the contractor a low-cost alternative in applications that are cost-sensitive, but still require a high quality of sound reproduction and reliability.


Features
• 120watt or 250 watt versions
• 2 RU

• 4 ohm or 100 volt output

• Rear panel volume control

• Balanced input and thru out

• Fan cooling on the AMC+ 250P

Data Sheet


AMIS120P
Whether the front end of your installation is a simple MX mixer or you are using a Revolution Series DSP system, the system effectively works according to the power amplifiers you choose. The AMIS series of power amplifiers are the first choice of contractors’ world wide because of their sonic performance and reliability.


Features
• Balanced XLR line level input with parallel output
• signal Present LED
• Rear panel level control
• Temperature Sensing Fan Cooling
• Current limiting protection
• 100V, 70V, 4 and 8 ohm outputs
• 2RU
• 240VAC/24VDC operation.

Data Sheet

AMIS1202P

Features
• Balanced XLR line level input with parallel output per channel
• Signal Present LED
• Rear panel level controls
• Current limiting protection
• 100V, 70V, 4 and 8 ohm outputs per amplifier
• 2RU
• 240VAC/24VDC operation


Data Sheet

AMIS250P


Features
• Balanced XLR line level input with parallel output
• signal Present LED
• Rear panel level control
• Temperature Sensing Fan Cooling
• Auto limiting protection
• 100V, 70V and 8 ohm outputs
• 2RU
• 240VAC/24VDC operation


Data Sheet

AMIS480



Features:
4 x 80 watts @ 4ohm, 70 volt, 100 volt.
2 RU chassis
Bi colour status LED per channel
Thermal fault LED
2 x dual speed fans
230/240 VAC or 24 VDC operation
Ground lift switches per channel
Balanced XLR line inputs
Input link through switching.

Data Sheet

DCM500

Features
240VAC/24VDC operation
Balanced XLR input with parallel output
Overload and overdrive protection
Fan cooling with auto temperature sensing
Built-in emergency trickle charge circuitry
Transformer balanced XLR input and output
Output level 10 stage LEDs
100V, 70V and 4 ohm outputs
2RU

Data Sheet

Synergy Voltage SY400V & SY800V
Synergy voltage amplifiers are high powered, higher spec, dual channel constant voltage amplifiers designed to deliver optimum performance all day, every day.

The SY400V delivers 2 x 200w at 100V line
The SY800V delivers 2 x 375w at 100V line


Features

• Custom designed, 2RU heavy duty steel chassis
• Symmetrical layout - even weight distribution
• High current power supply
• High efficiency toroidal mains transformer
• Binding post outputs
• Dual channel operation
• Balanced inputs and buffered attenuators
• 1 Watt output indication (2.828 volts)
• 1 dB below output clip indication
• Efficient front to back cooling
• Dual, twin speed axial fans
• Multi-role output fault indication
• Front carry handles
• Rear rack mount ears
• Signal ground lift switch
• Built in limiter circuit
• High-quality, close-tolerance components throughout

Australian Monitor also offers a six channel 100V line combination. The SY6125 offers 6 x 125 watts at 4 ohms. Simply add the SY6125T transformer unit and you have 6 x 125 watts at 100V!

Brochure