AMD10
The AMD100 is a feature packed, compact 1 RU Class D amplifier
Featuring the power of on board DSP processing, the connectivity of third party control via the RS485 port and the ability to support either the Australian Monitor ICON CP control panel or allow connection to a third party control system and a USB port for setup or for PC control. The Australian Monitor AMD100 represents the future of constant voltage amplification.
|
Features
• 4 mic/line inputs + 4 Stereo source inputs
• Stereo line output + Mono amplifier output (Constant voltage or Low impedance operation)
• 1 RU Class D design
• 60 Hz – 20 kHz frequency response amplifier output (20 Hz - 20 kHz Line level output)
• Low power contact closure
• DSP processing on board with Parametric EQ, compressor, delay and high and low pass filters
• Third party control via serial, Software GUI or via Australian Monitor Icon-CP control panel
• Remote VCA master volume control
• Mic/Line inputs have 34 volt phantom power
 Brochure
Manual |
|
AMD200
With an impressive 12 inputs the Australian Monitor AMD200 will give installers untold flexibility in a 1 RU mixer amplifier
Featuring 8 balanced Mic/Line level inputs each with 34V DC phantom power available and 4 dual RCA program source inputs and delivering 200 watts at 100 volt, 70 volt, 8 ohm and 4 ohm. With on board tones (Bell, Pre-Announce, Alert and Evac), remote master VCA, Vox triggered output (assignable to any one or combination of mic/line ins), 24DVC back up power input and low power contact closure, the Australian Monitor AMD200 has all the features of the smaller AMD100 compact class D amplifier.
The AMD200 also boasts the power of on board DSP processing, the connectivity of third party control via the RS485 port, which supports the Australian Monitor ICON CP control panel or allows connection to a third party control system and a USB port for setup or for PC control.
*Please note: the AMD200 software will only work correctly with a Windows 7 32bit computer. If you arerunning a Windows 7 64bit, you will not be able to get connection. An update is expected in 2012. |
Features
• 8 mic/line inputs + 4 Stereo source inputs
• Stereo line output + Mono amplifier output (Constant voltage or Low impedance operation)
• 1 RU Class D design
• 60 Hz – 20 kHz frequency response amplifier output (20 Hz - 20 kHz Line level output)
• Low power contact closure
• DSP processing on board with Parametric EQ, compressor, delay and high and low pass filters
• Third party control via serial, Software GUI or via • • Icon-CP control panel
• Remote VCA master volume control
• Mic/Line inputs have 34 volt phantom power
Brochure
Manual |
|
|
IC30
The IC30 is the smallest of the AMIS mixer amplifier range, delivering 30 watts of constant voltage or low impedance power from a compact, user-friendly package.
|
Features
• 4 Mic/line input mono mixer
• Master Volume, overall Treble & bass controls
• 1 RU
• Optional Tone generator
• On board priority
• 12VDC Phantom Power
Brochure |
|
AMC+
Now with 4 inputs and phantom power
The AMIS AMC+ series of mixer amplifiers takes the heritage and reliability of its well known series and gives the contractor a low cost alternative in applications that are cost sensitive, but still require a high quality of sound reproduction and reliability.
|
Features
• AMC + Series 30, 60, 120 & 250 watt models available
• 2 RU rack mountable chassis
• 4 XLR mic/dual RCA line inputs
• 100 volt or 4 ohm output
• Input 1 vox muting priority (internally defeatable)
• Optional Alert/Evac/Pre Announce/Bell tone board available
• 12VDC phantom power
Data Sheet Brochure |
|
AMIS
The Australian Monitor AMIS60 and AMIS120 have long been the backbone of countless commercial audio installations all over the world. With their peerless reliability, tireless performance and an extensive feature set the AMIS60 and AMIS120 have proved to be the most popular amplifiers Australian Monitor has ever produced.
In the next few weeks you will start to see the latest upgrade to the AMIS60 and AMIS120 mixer amplifiers start shipping from local warehouses. We have now made our most popular amplifiers even more contractor friendly with the addition of two extra balanced XLR mic/dual RCA line inputs. .
The AMIS60 and AMIS120 still boast the same reliability and excellent feature set including vox muting on channels 1 and 2 (defeatable), Bell, Pre Announce, Evac and Alert tones on board, Vox triggered output relay, VCA master level control, 15 VDC phantom power and mains or 24DVC operation.
You may have noticed that the 6 zone output switching facility has been removed, but this is now available as a separate product as the Zoned Out in the Contractor tools range and can be added to our mixer or booster amplifiers
|
Features
• 6 balanced mic/dual RCA line inputs
• 60 and 120 watt versions
• 2 RU
• Vox muting on channels 1 and 2 (defeatable)
• Bell, Pre Announce, Evac and Alert tones on board
• Vox triggered output relay
• VCA master level control
• 15 VDC phantom power
• Mains or 24DVC operation.
• 100 volt, 70 volt 4 or 8 ohm operation
Brochure Manual |
|
